· Model Number: N3030-2619
· Thread Size: 15/32-32-2B
· Flats: 0.625 Inches
· Plunger height: 0.281 Inches
· Color: Yellow
|
Light Weight Demolition Device
Duke Pro's LWDD is a combination electric
initiator and shock tube initiator in an ultra
small package designed to fit into a pouch
for a Beretta 9mm ammo clip.
Powered by two CR-123 lithium batteries,
|
Scorpion Solid-State Electronic Blasting Machine with Continuity/Resistance Indicator & Electronic Non Electric Initiator
Electrical Non-Electric Initator
Min Firing Voltage 450 VDC 2500 VDC
Min Firing Energy 5 Joules 0.5 Joules
Firing Capacity
|
Size
Weight
Color & Hardware
Power Source
Operating Temperatures
Storage Temperatures
Output Voltage
Output Energy
Firing Capacity
Connection
Ready Indicator
Charge/Fire Cycle Time
Electric Initiator
3"W x 2"D x 6"H
7.6cm W x 5.0cm D
|
Type of Circuitry: Solid State Electronic
Firing Control Circuit: SCR (silicon controlled rectifier)
Firing Voltage: 225 VDC Minimum
Firing Energy: 4.0 Joules (w/s)
Power Source: 1 Ea. 9V Alkaline Dry Cell ('AA' Cells, NEDA 15A
|
Weight: 10 oz. (0.3 kg)
Power Supply: One standard 9-Volt alkaline battery
Electric Output: 8 Joules at 320 Volts into 172 ohm load
(80 2-ohm caps through a 12-ohm lead line)
Shock Tube Tip: Fires both military and commercial shock tube
|
Weight: 10 oz. (0.3 kg)
Power Supply: One standard 9-Volt alkaline battery
Electric Output: 8 Joules at 320 Volts into 172 ohm load
(80 2-ohm caps through a 12-ohm lead line)
Shock Tube Tip: Fires both military and commercial shock tube
|
Case Material Urethane Plastic
Case Size Case: 3" W x 5.25" L x 2.1|" D
Weight Approximately 1.5 lbs.
Color O.D. Green
Waterproof: Yes (Sealed Electronics)
Self Test: Yes
Electric Initiator
Firing Voltage 350 VDC
Firing Energy 6 Joules
|
Designed to fit the following machines: HR1 Starter, HB-SBS, BTS-SBS & HB600. Attaches to these machines to initiate shock tube
|
Shock Tube Tip:
Fires both military and commercial shock tube
Carbon block technology
One active and three spare blocks built into tip for long life
Replacement carbon blocks available
|
on-Electric Initiator Tip
Firing Voltage 2,500+ VDC
Firing Energy 0.5 Joules
Energy Storage 3000 VDC 0.15 uF
Charge/Fire Cycle Time Approximately 1 second
Shock Tube Connector
(STC)
| |