HR8 NONELECTRIC STARTER

<< Previous in MANUAL SHOCK TUBE STARTER

Price: $140.97

Item Number: 14918

Options

* denotes required field

End User Name/Company: *

We (I) confirm that the goods above will not be used for purposes associated with chemical, biological or nuclear weapons or missiles capable of delivering such weapons.*

We (I) confirm that the goods above will not be re-sold or re-exported, if we know or suspect that they are intended or likely to be used for such purposes.*

Quantity:

Email this page to a friend

Length/Diameter: 7.5"L x .5"Diam
Weight: 4 oz.
Body: Derlin
Flashguard: Nylon
Operation: Mechanical Spring-Operated Steel Firing Pin
Energy Source: #209 Shotgun Shell Primer

U.S. Patent No.: 4,381,711
Classified by ATF as "NON-FIREARMS" permitting
unrestricted transportation and shipment

> Non-Electric 'HR' Initiator Instruction & Care Information <
Practical and economical. Made of super-tough delrin and nylon with all steel firing mechanism. Well made yet thrifty tool.

The Scorpion "HR" models are mechanical initiators designed for initiation of non-electric blasting systems.

Utilizing the energy release of the #209 shotgun shell primer which is readily loaded into the HR's breech block, it can be readied for operation in just a few seconds. After cocking and loading, with the flashguard in place to protect the blaster, non-electric tubing is inserted into the barrel of the nozzle and the device is ready to initiate the blast by simply flipping the trigger from its cocked position.

TO INITIATE:

1. Pull back and align Cock Pin so that is seats in the locked position as shown above
2. Remove Safety Pin from Through Hole in Flash Guard.
3. Slide Flash Guard toward Cock Pin so as to expose the Nozzle.
4. While twisting clockwise pull Nozzle away from fork (not shown).
5. Place shotgun shell primer in base of Nozzle.
6. Replace Nozzle onto forks until snug and seated properly.
7. Slide Flash Guard forward toward Nozzle.
8. Place Safety Pin into Safety Pin Hole.
9. String Non-Electric firing line through Through Hole and up and around into Nozzle.
10. When blast site is secured and free of people remove Safety Pin from Safety Pin Hole.
11. Apply backward pressure to Cock Pin and while holding it stationary rotate it into Firing Pin Track.
12. Release pressure on Cock Pin so as to let it freely move along Firing Pin Track.

TO SECURE:

1. Remove spent Non-Electric line from Nozzle and Through Holes.
2. Repeat step under "TO INITIATE" so as to re-cock the Cock Pin.
3. Slide Flash Guard down toward Cock Pin.
4. While twisting clockwise pull Nozzle away from Forks.
5. Remove spent shotgun shell primer from base of Nozzle.
6. Clean as necessary and replace Nozzle to Forks until snug and seated properly.
7. Slide Flash Guard forward toward Nozzle.
8. Rotate Cock Pin into Firing Pin Track and gently guide forward until it stops.
9. Place Safety Pin into Through Holes.