HR33 DUAL LINE STARTER

Length/Diameter: 7.5"L x .5"Diam
Weight: 6 oz.
Body: Stainless Steel
Flashguard: Stainless Steel
Operation: Mechanical Spring-Operated Steel Firing Pin
Energy Source: #209 Shotgun Shell Primer

U.S. Patent No.: 4,381,711
Classified by ATF as "NON-FIREARMS" permitting
unrestricted transportation and shipment

Durable high quality tool designed for economy and reliability. Provides dependable lasting performance for long term use.

The Scorpion "HR" models are mechanical initiators designed for initiation of non-electric blasting systems.

Utilizing the energy release of the #209 shotgun shell primer which is readily loaded into the HR's breech block, it can be readied for operation in just a few seconds. After cocking and loading, with the flashguard in place to protect the blaster, non-electric tubing is inserted into the barrel of the nozzle and the device is ready to initiate the blast by simply flipping the trigger from its cocked position.

Available in 3 different models: The HR-3, for single non-electric line initiation; the HR-33, for dual non-electric line initiation; and the HR-333 for triple non-electric line initiation.

TO INITIATE:

1. Pull back and align Cock Pin so that is seats in the locked position as shown above
2. Remove Safety Pin from Through Hole in Flash Guard.
3. Slide Flash Guard toward Cock Pin so as to expose the Nozzle.
4. While twisting clockwise pull Nozzle away from fork (not shown).
5. Place shotgun shell primer in base of Nozzle.
6. Replace Nozzle onto forks until snug and seated properly.
7. Slide Flash Guard forward toward Nozzle.
8. Place Safety Pin into Safety Pin Hole.
9. String Non-Electric firing line through Through Hole and up and around into Nozzle.
10. When blast site is secured and free of people remove Safety Pin from Safety Pin Hole.
11. Apply backward pressure to Cock Pin and while holding it stationary rotate it into Firing Pin Track.
12. Release pressure on Cock Pin so as to let it freely move along Firing Pin Track.

TO SECURE:

1. Remove spent Non-Electric line from Nozzle and Through Holes.
2. Repeat step under "TO INITIATE" so as to re-cock the Cock Pin.
3. Slide Flash Guard down toward Cock Pin.
4. While twisting clockwise pull Nozzle away from Forks.
5. Remove spent shotgun shell primer from base of Nozzle.
6. Clean as necessary and replace Nozzle to Forks until snug and seated properly.
7. Slide Flash Guard forward toward Nozzle.
8. Rotate Cock Pin into Firing Pin Track and gently guide forward until it stops.
9. Place Safety Pin into Through Holes.