ERNA-2 Blasting Machine

ERNA series of blasting machines are hand cranked units that require no batteries. These compact, light weight units come with solid aluminum cases. These tightly sealed outer casings exceed all NEMA standards and are rated at IP65 under the international standard IEC 65029. This means that these blasting machine cases are splash proof and dust proof. The ERNA series of blasting machines can be used safely even in more challenging environments.
ERNA

The ERNA blasting machine has temperature compensating circuits to facilitate cold weather operation.
ERNA-2

The ERNA-2 is an upgrade, with an added line tester that checks the detonator line resistance to identify short circuits, breaks in the blasting line, or overloaded circuits before you attempted to blast. This remarkable technology virtually eliminates misfires caused by detonator wiring problems, which is one of the leading causes of blast related injuries.

Model - ERNA-2
Maximum line resistance (in Ohms) - 200 �©
Firing energy (in Joules) - 2.1 J
Blasting capacity(in 2 Ohm caps approximately) - 100 caps
Firing voltage - 250 V
Firing impulse duration - not limited
Power supply - hand cranked
Capacitor charging - 4 to 6 crank turns
Capacitor rating - 68 μF
Line resistance testing - test lamp
Line testing current maximum - 1 mA
Operating ambient temperature range
at 100% relative humidity - 25C to +55C (-13F to 131C)
Protection level of outer casing
(per IEC 60529) - IP65
Weight - 0.8 kg (1 lb 12 oz)
Casing dimensions - 142 x 125 x 45 mm (5"x5"x1")